Essential Tips to Ensure That Your Boiler Is in Good Condition

Trade experts can fail to repair or maintain boilers for months or even years without even doing proper inspection. It is worth noting that the early generations of the atmospheric gas boilers were designed in a special way to go for a long time without the need for maintenance. Currently, the National Boiler Codes state that all commercial boilers in Whitecourt should be inspected or checked by an accredited boiler contractor at least twice a year. Here are top leading tips to help you keep your boiler in good shape:

Check the Burner It is prudent to keep a detailed record of all the conditions and the repairs done on the burner. However, many people neglect this important step whenever they are maintaining their boilers in Whitecourt, thus lengthening the time it takes to carry out system diagnostics. It is up to an expert to make sure that all the electrical circuits he or she comes across are secure. In addition, inspect the entire wiring to ensure that there is no overheating. If the wires overheat, they may harden or melt leading to a more serious problem. This explains why basic record keeping is necessary at the end of the day. During your daily inspection of the burner, you have to remove the burner itself so as to check the combustion chamber as well as the coils inside.

Inspect the Flue Passages the passages can be used to find out if the boiler is burning effectively. If you notice any soot in the flue passage, it indicates that the system is burning without enough supply of oxygen. Presence of moisture in the vent pipe is a sign that the system is running too cool.
Check the Sensing Rods This is another area that ought to be examined. You have to ensure that all flame-sensing rods are properly gaped. Additionally, you have to inspect the ceramic retainer that holds each and every spark rod making sure that there are no hairline fractures.

Examine Fans and Blowers the dirt can accumulate on the fins. However, if the boiler is fitted with filters, it is wise to replace or clean them for better performance. When you are inspecting various parts of the boiler, you should ensure that the boiler is not running in order to avoid possible injuries or damages.

Monitor Carbon Monoxide, Carbon Dioxide and Oxygen Levels the combustion analyzer can be used to determine the levels of the three main gases. In general, you are looking for about 10 percent carbon dioxide and less than 20 parts per million carbon monoxide. For better results, you should monitor gases from the low fire settings to high fire settings. Since you cannot see the flame, the only way to properly adjust and test sealed combustion boilers in cell towers in Whitecourt is by use of a combustion analyzer. When the burner is not adjusted well, the unit will run dirty, fouling the combustion chambers.

Other important parts you should examine include switches, block valves and high temperature limits. You can call professionals at cell towers in Whitecoat to install and repair your boiler to ensure that it performs as required.

Leave a Reply